DIY Fabric Art

Posted on



Supples needed:

  1. Frames
  2. Fabric
  3. Hot Glue
  4. Hammer/nails or Command hooks


  1. The first thing you’re going to do is determine how big you want your frames.
  2. Next I cut 1/8 inch off one edge of the cardboard to allow room for the fabric when placing it back in the frame. Then I cut out a piece of fabric about 2 inches wider than the cardboard. After that I wrapped the cardboard like a present with the fabric, hot gluing as I went and then I placed the piece back in the frame.
  3. This project took me less than an hour from start to finish. Can’t beat that! The possibilities really are endless with this simple piece of decor. Get creative! 😀






Supplies needed:

  1. Art Canvas or Styrofoam model
  2. Fabric
  3. Staple Gun


  1. ​Iron fabric and place on a work surface wrong side up.  Cut fabric leaving enough on each side to staple to the art frame.  Staple once on one side of the canvas and then again on the other side making sure that the fabric is even and snug.
  2. Continue stapling until two sides are complete.  Fold the fabric in on each corner and staple.
  3. Staple the other sides and the corners.

Get creative by adding word/animal templates, ribbons or decorative strings! 😀